| DC Geared Motor Center shaft 10RPM |
ROBO001 |
Rs180.00
|
 |
10RPM Centre Shaft DC Motor is high quality low cost DC geared motor for Robotic Application. |
|
| DC Geared Motor 30RPM |
ROBO002 |
Rs150.00
|
 |
30RPM 12V DC geared motors used for robotics applications. Very easy to use and available in standard size. |
|
| DC Geared Motor 60RPM |
ROBO003 |
Rs150.00
|
 |
60RPM 12V DC geared motors used for robotics applications. Very easy to use and available in standard size. |
|
| DC Geared Motor 100RPM |
ROBO004 |
Rs150.00
|
 |
100RPM 12V DC geared motors used for robotics applications. Very easy to use and available in standard size. |
|
| DC motor Clamp |
ROBO006 |
Rs20.00
|
 |
DC Motor Clamps are used in Robotic Application for mounting High torque DC Geared Motors. |
|
| L293 |
ROBO007 |
Rs75.00
|
 |
The L293D is a quadruple half H-bridge bidirectional motor driver IC that can drive current of up to 600mA with voltage range of 4.5 to 36 volts. It is suitable to drive small DC-Geared motors, bipolar stepper motor etc. |
|
| Small Castor wheel |
ROBO008 |
Rs20.00
|
 |
Castor for general robotic application. Caster wheel provides omni-directional movement. It is used in autonomous as well as manual robots for balancing. |
|
| Big castor wheel |
ROBO009 |
Rs30.00
|
 |
Castor for general robotic application. Caster wheel provides omni-directional movement. It is used in autonomous as well as manual robots for balancing. |
|
| Chassis |
ROBO012 |
Rs65.00
|
 |
Small Chassis are most suitable for quickly prototyping small sized robot. Uses Centre Shaft Economy series motors and low cost wheels. Easy to Mount the Motors on Place by Using Normal Motor Mount Nut. |
|
| Jumbo Chassis |
ROBO013 |
Rs130.00
|
 |
Jumbo Chassis are most suitable for quickly prototyping Big sized robot. Easy to Mount the Motors on Place by Using Normal Motor Mount Nut. |
|
| Track belt |
ROBO014 |
Rs130.00
|
 |
Track belts /V-Belt are used for making tracked robots. They are a perfect solution for slippage and alignment problem. Track belts are available in variety of shapes and sizes. |
|
| HT12E |
ROBO015 |
Rs40.00
|
 |
HT12E : 212 Series of Ecoder. The 212 encoders are a series of CMOS LSIs for remote control system applications. They are capable of encoding information which consists of N address bits. |
|
| HT12D |
ROBO016 |
Rs40.00
|
 |
HT12D : 2-12 Series of Decoder. The 2-12 decoders are a series of CMOS LSIs for remote control system applications. |
|
| Robotic Wheel 7x2 cm |
ROBO017 |
Rs35.00
|
 |
These are High quality small wheels used in robotic application. Fits on any of geared DC motors with 6mm shaft. |
|
| Robotic Wheel 7x4 cm |
ROBO018 |
Rs65.00
|
 |
These are High quality Big wheels used in robotic application. Fits on any of geared DC motors with 6mm shaft. |
|
| Robotic Wheel 10x2.3 cm |
ROBO019 |
Rs80.00
|
 |
These are High quality Big wheels used in robotic application. Fits on any of geared DC motors with 6mm shaft. |
|
| Track wheel 7X2 cm |
ROBO020 |
Rs35.00
|
 |
These are High quality Track wheels used in robotic application as Pulley for 2cm tracked belt. Fits on any of geared DC motors with 6mm shaft. |
|
