• ZE03-HF GAS Sensor Module

Product Images are shown for illustrative purposes only and may differ from actual product.

ZE03-HF GAS Sensor Module

  • Brand: Winsen
  • Product Code: 1767
  • Availability: Pre-Order Delivery 12-15 Days
  • Price :

    Rs.16,872.82 (inc GST)

    Qty :

GST Invoice on all Purchase. So you will be eligible to take input tax credit.

IF component not in Stock or require more quantity or want to buy in bulk e-mail us your requirements on: dnatechindia "at" gmail.com.

Shipping : Same day dispatch for Most orders if payment done before 4 pm. Delivery Normally takes 2 to 7 working days depending upon your location.

Electrochemical Detection Module ZE03-HF

ZE03-HF Gas sensor can be used to measure Hydrogen fluoride in atmosphere. This is an Industrial grade sensor and is are very easy to interface to your Micro-controller, Arduino as well as Raspberry Pi as they have linear Analog output as well as UART output (3 volts).

ZE03 Series of Gas Sensor Modules by Winsen is a general-purpose and high-performance electrochemical module. It uses three electrodes, electro-chemical gas sensor and high-performance micro-processor. By using this GAS Sensor you will be able to Monitor concentration of Hydrogen fluoride gas.

It is with built-in temperature sensor to make temperature compensation, which makes more accurate to detect Hydrogen fluoride gas concentration. It has the digital output as well as analog voltage output at the same time which facilities the usage and calibration and shortens the development period. It is a combination of mature electrochemical detection principle and sophisticated circuit design, to meet customers different detection needs.

    Features Of ZE03-HF GAS Detection Module

    • High sensitivity & resolution
    • Low power consumption
    • UART and analog voltage output
    • Good stability and excellent anti-interference ability

    Application Of ZE03-HF GAS Detection Module

    • Portable and fixed gas detector, various gas detection equipment and situation.

    Technical Parameters of ZE03-HF Oxygen GAS Sensor Module

    • Model No: ZE03
    • Target Gas: Hydrogen Fluoride (HF)
    • Working Voltage: DC 4 Volts to 9 Volts
    • Working Current: < 5 mA
    • Size ø23.5mm*24.5mm
    • Working Life: 2 year
    • Output Data: UART Output (TTL electrical level, 3 Volts) and Analog Voltage 
    • Storage Environment  Temp.:    20~25°C
    • Storage Environment Humidity.: 30%RH-70%RH
    • Operating Environment Temp.: -20~50°C
    • Operating Environment Humidity.: 15%RH-90%RH (no condensation)

    Detection range and signal output 

    • Detection range: 0 - 10 ppm
    • Voltage output: 2 - 0 Volts
    • Response Time: ≤60s

    Pin definition Of Hydrogen Fluoride Gas Sensor Module ZE03-HF

    • GND : Ground
    • VCC : Power supply (4 volt to 9 volts)
    • VO : Analog output Voltage 
    • RXD : Serial Port Input (3 volts)
    • TXD : Serial port output (3 volts)

    Related Link

    Reviews (0)

    Write a review

    Note: HTML is not translated!
        Bad           Good

    NEW Products

    Product Page : New Products

    VL6180X Distance Sensor Module

    VL6180X Distance Sensor Module

    VL6180X Distance Sensor ModuleVL6180X Time of Flight Distance SensorThe VL6180X is a time-of-flight ..

    Rs.623.04 (inc GST)

    Nrf24l01 adaptor board 

    Nrf24l01 adaptor board 

    Nrf24l01 adaptor board Low cost Breakout board for NRF24L01 RF ModulesHaving problem interfacin..

    Rs.82.60 (inc GST)

    MPS20N0040D Pressure sensor

    MPS20N0040D Pressure sensor

    MPS20N0040D SensorMPS20N0040D MEMS Air Pressure Sensor.MPS20N0040D Air pressure sensor measures pres..

    Rs.259.60 (inc GST)

    T-Cobbler Plus for Raspberry Pi 2 & 3

    T-Cobbler Plus for Raspberry Pi 2 & 3

    T-Cobbler Plus for Raspberry Pi 2 and 3GPIO Extension Board for Raspberry Pi 3B and Raspberry Pi 3B ..

    Rs.236.00 (inc GST)

    Have You Seen

    Product Page : Have You Seen

    MAX 550 Micro Soldering Station

    MAX 550 Micro Soldering Station

    MAX 550 Micro Soldering StationThis is a prefect low cost solder station if you are looking to solde..

    Rs.472.00 (inc GST)

    Samsung 18650 2600mah Li-ion Battery

    Samsung 18650 2600mah Li-ion Battery

    Samsung ICR18650-26J 2.6Ah BatteryOriginal Samsung 18650 2600 mah Lithium-ion BatteryThis is or..

    Rs.275.00 (inc GST)

    SPDT 2 way Toggle Switch  (ON-ON)

    SPDT 2 way Toggle Switch (ON-ON)

    SPDT 3 Pin 2 Way Toggle SwitchMTS102 Single Pole Double throw (SPDT) ON-ON type Panel Mounting switc..

    Rs.22.42 (inc GST)

    Arduino Mega 2560 Pro Mini

    Arduino Mega 2560 Pro Mini

    Mega Pro 2560 Development Board Mega 2560 Pro a  Atmega2560 based compact Arduino MegaThis..

    Rs.973.50 (inc GST)