dsPIC30f3014

High-Performance,16-bit Digital Signal Controllers

dsPIC30F Motor Control 16-bit Digital Signal Controller. Seamless migration options from this device to dsPIC33F and PIC24 devices in similar packages.

Features of dsPIC30f3014

High-Performance Modified RISC CPU:

• Modified Harvard Architecture

• C Compiler Optimized Instruction Set Architecture

• Flexible Addressing modes

• 83 Base Instructions

• 24-Bit Wide Instructions, 16-Bit Wide Data Path

• Up to 48 Kbytes On-Chip Flash Program Space

• 2 Kbytes of On-Chip Data RAM

• 1 Kbyte of Nonvolatile Data EEPROM

• 16 x 16-Bit Working Register Array

• Up to 30 MIPS Operation:

           - DC to 40 MHz External Clock Input

           - 4 MHz-10 MHz Oscillator Input with

• PLL Active (4x, 8x, 16x)

• Up to 33 Interrupt Sources:

          - 8 user-selectable priority levels

          - 3 external interrupt sources

          - 4 processor traps

DSP Features

• Dual Data Fetch
• Modulo and Bit-Reversed modes
• Two 40-Bit Wide Accumulators with Optional saturation Logic
• 17-Bit x 17-Bit Single-Cycle Hardware Fractional/Integer Multiplier
• All DSP Instructions are Single Cycle

          - Multiply-Accumulate (MAC) Operation

• Single-Cycle ±16 Shift

Peripheral Features of dsPIC30f3014

• High-Current Sink/Source I/O Pins : 25 mA/25 mA
• Up to Five 16-Bit Timers/Counters; Optionally Pair Up
• 16-Bit Timers into 32-Bit Timer modules
• Up to Four 16-Bit Capture Input Functions
• Up to Four 16-Bit Compare/PWM Output Functions
• Data Converter Interface (DCI) Supports Common
• Audio Codec Protocols, Including I2S and AC’97
• 3-Wire SPI module (supports 4 Frame modes)
• I2C™ module Supports Multi-Master/Slave mode and 7-Bit/10-Bit Addressing
• Up to Two Addressable UART modules with FIFO Buffers
• CAN bus module Compliant with CAN 2.0B Standard

Analog Features of dsPIC30f3014

• 12-Bit Analog-to-Digital Converter (ADC) with:

          - 200 ksps conversion rate

          - Up to 13 input channels

          - Conversion available during Sleep and Idle

• Programmable Low-Voltage Detection (PLVD)

• Programmable Brown-out Reset