FT232RL USB TO TTL 5V 3.3V Convertor

NOTE: PC Interfacing Cable is not provided with this module

We have Various sizes of Communication Modules. Check out our complete collection of Communication Modules.

The FT232RL is a USB to serial UART interface IC with the following advanced features:

• Single chip USB to asynchronous serial data transfer interface.

• Entire USB protocol handled on the chip. No USB specific firmware programming required.

• Fully integrated 1024 bit EEPROM storing device descriptors and CBUS I/O configuration.

• Fully integrated USB termination resistors.

• Fully integrated clock generation with no external crystal required plus optional clock output selection enabling a glue-less interface to external MCU or FPGA.

• Data transfer rates from 300 baud to 3 Mbaud (RS422, RS485, RS232) at TTL levels.

• 128 byte receive buffer and 256 byte transmit buffer utilising buffer smoothing technology to allow for high data throughput.

Features of FT232RL USB TO TTL 5V 3.3V Convertor

• Material : PCB + Electronic Component

• Support 3.3V, 5V

• Main Color : Red

• Chipset : FT232RL

• USB power has over current protection, using 500MA self-restore fuse

• RXD/TXD transceiver communication indicator

• Pin definition : DTR,RXD,TX,VCC,CTS,GND

• Pitch : 2.54mm

• Module Size : About 36mm(length)*17.5mm(width)

• Interface : Mini USB