Product Images are shown for illustrative purposes only and may differ from actual product.
Flame Sensor Module
GST Invoice on all Purchase. So you will be eligible to take input tax credit.
IF component not in Stock or require more quantity or want to buy in bulk e-mail us your requirements on: dnatechindia "at" gmail.com.
|Shipping : Same day dispatch for Most orders if payment done before 4 pm. Delivery Normally takes 2 to 7 working days depending upon your location.|
Flame - Fire Sensor Module
A flame detector is a sensor designed to detect and respond to the presence of a flame or fire. Responses to a detected flame depend on the installation, but can include sounding an alarm, deactivating a fuel line (such as a propane or a natural gas line), and activating a fire suppression system. When used in applications such as industrial furnaces, their role is to provide confirmation that the furnace is properly lit; in these cases they take no direct action beyond notifying the operator or control system. A flame detector can often respond faster and more accurately than a smoke or heat detector due to the mechanisms it uses to detect the flame.
Features of Flame Sensor
Can detect a flame or in a 760 nanometer wavelength of ~ 1100 nm range of the light, lighter flame test distance of 80cm, for the greater flame, the farther the distance test
The detection angle of 60 degrees or so, particularly sensitive to the flame spectrum
Sensitivity adjustable (shown in blue digital potentiometer adjustment)
The comparator output signal clean, good waveform, driving ability, more than 15mA
With adjustable precision potentiometer sensitivity adjustment
The working voltage of 3.3V-5V
The output format: DO digital switching outputs (0 and 1) and AO analog voltage output
A fixed bolt holes for easy installation
Using a wide voltage LM393 comparator
Instructions for use
The flame sensor flame most sensitive to ordinary light is also a reaction, generally used as a flame alarm purposes.
The output interface can be directly connected to the microcontroller IO port.
With the flame sensor to maintain a certain distance, so as not to damage the sensor temperature, the flame of a lighter test distance 80 cm, for the greater flame, the farther the distance test.
- Analog output and the AD conversion process, can achieve higher accuracy.
Product Page : New Products
VL6180X Distance Sensor ModuleVL6180X Time of Flight Distance SensorThe VL6180X is a time-of-flight ..
Rs.623.04 (inc GST)
Nrf24l01 adaptor board Low cost Breakout board for NRF24L01 RF ModulesHaving problem interfacin..
Rs.82.60 (inc GST)
MPS20N0040D SensorMPS20N0040D MEMS Air Pressure Sensor.MPS20N0040D Air pressure sensor measures pres..
Rs.259.60 (inc GST)
T-Cobbler Plus for Raspberry Pi 2 and 3GPIO Extension Board for Raspberry Pi 3B and Raspberry Pi 3B ..
Rs.236.00 (inc GST)
Have You Seen
Product Page : Have You Seen
MAX 550 Micro Soldering StationThis is a prefect low cost solder station if you are looking to solde..
Rs.472.00 (inc GST)
Samsung ICR18650-26J 2.6Ah BatteryOriginal Samsung 18650 2600 mah Lithium-ion BatteryThis is or..
Rs.275.00 (inc GST)
SPDT 3 Pin 2 Way Toggle SwitchMTS102 Single Pole Double throw (SPDT) ON-ON type Panel Mounting switc..
Rs.22.42 (inc GST)
Mega Pro 2560 Development Board Mega 2560 Pro a Atmega2560 based compact Arduino MegaThis..
Rs.973.50 (inc GST)
The LM35 series are precision integrated-circuit temperature sensors, whose output voltage is linear..
Rs.66.91 (inc GST)
MQ2 Smoke and Flammable Gas Sensor ModuleThis is a very easy to use low cost semiconductor Gas ..
Rs.180.54 (inc GST)