• 8412906903
  • dnatechindia@gmail.com
  • ZE03-HCL GAS Sensor Module

Product Images are shown for illustrative purposes only and may differ from actual product.

ZE03-HCL GAS Sensor Module

  • Brand: Winsen
  • Product Code: 1768
  • Availability: Pre-Order Delivery 12-15 Days
  • Price :

    Rs.13,259.66 (inc GST)

    Qty :

GST Invoice on all Purchase. So you will be eligible to take input tax credit.

IF component not in Stock or require more quantity or want to buy in bulk e-mail us your requirements on: dnatechindia "at" gmail.com.

Shipping : Same day dispatch for Most orders if payment done before 4 pm. Delivery Normally takes 2 to 7 working days depending upon your location.

Electrochemical Detection Module ZE03-HCL

ZE03-HCL Gas sensor can be used to measure Hydrogen chloride concentration in atmosphere. This is an Industrial grade sensor and is are very easy to interface to your Micro-controller, Arduino as well as Raspberry Pi as they have linear Analog output as well as UART output (3 volts).

ZE03 Series of Gas Sensor Modules by Winsen is a general-purpose and high-performance electrochemical module. It uses three electrodes, electro-chemical gas sensor and high-performance micro-processor. By using this GAS Sensor you will be able to Monitor concentration of Oxygen gas.

It is with built-in temperature sensor to make temperature compensation, which makes more accurate to detect Hydrogen chloride gas concentration. It has the digital output as well as analog voltage output at the same time which facilities the usage and calibration and shortens the development period. It is a combination of mature electrochemical detection principle and sophisticated circuit design, to meet customers different detection needs.

    Features Of ZE03-HCL GAS Detection Module

    • High sensitivity & resolution
    • Low power consumption
    • UART and analog voltage output
    • Good stability and excellent anti-interference ability
    • Detection Gas: HCl, hydrogen chlorine
    • Detection Range: 0~20ppm

    Application Of ZE03-HCL GAS Detection Module

      • Portable and fixed gas detector, various gas detection equipment and situation.

      Technical Parameters of ZE03-HCL Hydrogen chloride GAS Sensor Module

      • Detection gas: Hydrogen Chloride (HCL)
      • Measurement Range:                   0~20ppm
      • Max detecting concentration:    200ppm
      • Sensitivity:                                        (0.8±0.4)µA/ppm
      • Resolution ratio:                        0.1ppm
      • Response time:                               (T90)  ≤30S
      • Bias voltage:                               0mV
      • Load resistance (recommend): 10Ω
      • Repeatability:                                  <2%output value
      • Stability (/month):                          <2%
      • Output Linearity:                             linear
      • Zero drift (-20℃~40℃):                 ≤0.2ppm
      • Storage temperature:                   -20°C~50°C
      • Storage Humidity:                          15%~90%RH
      • Pressure range (kPa):                     90-110
      • Anticipated using life:                     2 years

      Pin definition Of Electro-chemical Detection Module ZE03-HCL

      • GND : Ground
      • VCC : Power supply (4 volt to 9 volts)
      • VO : Analog output Voltage 
      • RXD : Serial Port Input (3 volts)
      • TXD : Serial port output (3 volts)

      Related Link

      Reviews (0)

      Write a review

      Note: HTML is not translated!
          Bad           Good

      NEW Products

      Product Page : New Products

      AM2302 Humidity And Temperature Module

      AM2302 Humidity And Temperature Module

      AM2302 Sensor ModuleAM2302 Temperature and Humidity Sensor Module (wired DHT22 Sensor)The AM2302 is ..

      Rs.501.50 (inc GST)

      XH-W1401 Thermostat Module 

      XH-W1401 Thermostat Module 

      XH-W1401 Temperature Controller Module XH-W1401 12 volt Digital Thermostat ModuleXH-W1401 is a ..

      Rs.454.30 (inc GST)

      MPR121 12 channel Touch Sensor Module 

      MPR121 12 channel Touch Sensor Module 

      MPR121 Touch Sensor ModuleMPR121 12 channel capacitive touch sensor moduleThis module is based on NX..

      Rs.200.60 (inc GST)

      Prototyping Shield For Raspberry PI

      Prototyping Shield For Raspberry PI

      Prototyping Shield For Raspberry PIDIY Prototyping Expansion board for Raspberry PiThis prototyping ..

      Rs.637.20 (inc GST)

      Have You Seen

      Product Page : Have You Seen

      MAX 550 Micro Soldering Station

      MAX 550 Micro Soldering Station

      MAX 550 Micro Soldering StationThis is a prefect low cost solder station if you are looking to solde..

      Rs.472.00 (inc GST)

      Samsung 18650 2600mah Li-ion Battery

      Samsung 18650 2600mah Li-ion Battery

      Samsung ICR18650-26J 2.6Ah BatteryOriginal Samsung 18650 2600 mah Lithium-ion BatteryThis is or..

      Rs.275.00 (inc GST)

      SPDT 2 way Toggle Switch  (ON-ON)

      SPDT 2 way Toggle Switch (ON-ON)

      SPDT 3 Pin 2 Way Toggle SwitchMTS102 Single Pole Double throw (SPDT) ON-ON type Panel Mounting switc..

      Rs.22.42 (inc GST)

      Arduino Mega 2560 Pro Mini

      Arduino Mega 2560 Pro Mini

      Mega Pro 2560 Development Board Mega 2560 Pro a  Atmega2560 based compact Arduino MegaThis..

      Rs.973.50 (inc GST)