XL4015 5A DC-DC Step Down Adjustable Supply Buck Module with Voltmeter

The voltmeter can also be shutdown. The board uses connection terminal for easy wiring.

5A 75W XL4015 DC-DC Converter Adjustable Step-Down Module 4.0-38V to 1.25V-36V DIY Adjustable Power Supply XL4015 LED module step down The DC-DC Adjustable Step Down Converter Module has large power, high efficiency, low-ripple. With power indicator, on-board voltmeter. The voltmeter can calibrate automatically. The measure can be changed between input and output voltage, with indicator.

Specification of XL4015 5A DC-DC Step Down Adjustable Supply Buck Module with Voltmeter

• Better than 2596, easy to 4A 50W, up to 75W adding heat sink

• Input voltage : 4V ~ 38V (not more than 38V)

• Output voltage : 1.25V ~ 36V (adjustable)

• Output current : 0A ~ 5A (recommended below 4.5A)

• Output power : recommended use below 75W (add heat sink when more than 50W)

• Operating temperature : -40°C ~ +85°C

• Operating frequency : 180KHz

• Conversion efficiency : Up to 96% (based on input and output voltage, current, pressure)

• Voltmeter range : 0V ~ 40V

• Voltmeter error : ±0.1V (NOTE: To ensure the accuracy, keep the input above 4.5V)

• Load regulation : S (I) ≤0.8%

• Voltage regulation rate : S (u) ≤0.8%

• Power indicator : Yes

• Short circuit protection : Yes (limit current 8A)

• Over temperature protection : Yes (shutdown output automatically after over temperature)

• Input Reverse Polarity Protection : None (cascade high current diode if required)

• Wiring : IN+/- Input, OUT+/- Output

• Size : 66 x 39 x 18mm