Attention !!! Due to COVID-19 situation shipping and sales services will be affected. Any order placed now will be shipped once the situation is back to normal. Thankyou for understanding & support. Stay Safe & Stay Calm.
  • 8412906903
  • dnatechindia@gmail.com

Product Images are shown for illustrative purposes only and may differ from actual product.

600W Step Up Boost Module

  • Stock: Out Of Stock
  • SKU: 2011 | DAA962
  • Rs. 1,298.00 (inc GST)
    Rs.1,100.00 + GST

    Qty :

GST Invoice on all Purchase. So you will be eligible to take input tax credit.

IF component not in Stock or require more quantity or want to buy in bulk e-mail us your requirements on: dnatechindia "at" gmail.com.

Shipping : Due to Covid-19 situation delivery will be affected. Delivery period due to covid-19 issue will be from 4 - 12 days depending upon your location.

600 Watt Step Up Power Supply Module

600 Watt Step Up Constant Voltage, constant Current Adjustable Power Supply Module

This is a non isolated 600 watt boost module with constant voltage and constant current output. This module has not extra heatsink as an aluminium clad PCB is used thus making it less bulky and comparatively smaller size. The module can provide a max peak output current on 10 ampere. The output voltage is adjustable from 12 volt to 60 volts.

This module has constant voltage and constant current output which can be adjusted using the multiturn potentiometer on the module. This 600 watt DC - DC Boost module is perfect for charging your lithium ion battery packs for e-bike or e-scooter.

Details of 600 watt DC to DC Boost Module

  • Module Properties : Non-Isolated Boost Module (BOOST)
  • Input voltage : DC 10 to 60 Volts
  • Input current : 10 (MAX) Ampere
  • Static operating current : 10 mA (12 Volt 20 Volt, the higher the output voltage, static and current will increase)
  • Output voltage : 12 to 60 Volt adjustable
  • Output current : 10 Ampere MAX More than 6 Ampere
  • Constant current range : 0.2 - 10 Ampere
  • Output power : = input voltage * 10A, such as : input 12V * 10A = 120W, input 24V * 10A = 240W, input 36V*10A=1360W, input 60V*10A=600W,

  • Operating temperature : -40 ~ +85 degrees (enhance the heat when the ambient temperature is too high)

  • Operating frequency : 150KHz
  • Conversion efficiency : 92%-96% (efficiency related to input, output voltage, current, differential pressure)
  • Reverse input protection : None (note that positive and negative should not be reversed)
  • Wiring method : wiring output
  • Output voltage regulation : Adjust CV-ADJ potentiometer, according to your battery or LED, set the output voltage to your desired voltage value. Turn clockwise the voltage reduce and turn it counterclockwise, it becomes larger.
  • Output current adjustment : Adjust the CC-ADJ potentiometer clockwise by 20 turns, set the output current to the minimum, connect to the LED, and adjust the CC-ADJ potentiometer to your desired current. For battery charging, after discharging the battery, connect it to the output and adjust the CC-ADJ to your desired current. 

Instructions for using 600 watt DC to DC Step up Module

  • VIN+ is the input power anode, VIN- is the input power cathode,
  • OUT+ is the positive output power, OUT- is the negative output power,
  • Constant pressure adjustable range : DC12-60V (clockwise small, counterclockwise larger)
  • Constant current adjustable range : 0.2A-10A (clockwise small, anticlockwise large,)
  • When the input current exceeds 6A, it is necessary to strengthen the heat dissipation (the aluminum substrate is attached to the flat metal part),
  • The input voltage can not be lower than 10V or more than 60V,
  • Input maximum current can not exceed 10A, power can not exceed 600W,
  • Must ensure that the input voltage is lower than the output voltage by 2V or more.
  • Before turning on the load, please adjust the required voltage and current at no-load (no-load voltage should be increased by 3-5 Volt at constant current).
  • When using switching power supply or other secondary power supply, please ensure that the power supply power should be more than double the power supply power of this module.

Applications of 600 Watt boost Power Supply Module

  • DIY a power supply, input 12 Volt can be, the output can be adjusted 12-50 Volt.
  • For your electronic equipment power supply, you can set the output value according to your system voltage.
  • As the car power supply, power your laptop, PDA or a variety of digital products.
  • a high-power notebook mobile power DIY : coupled with a large-capacity 12 Volt lithium battery pack, so that where your notebook can be lighted where.
  • Solar panel voltage regulator.
  • To the battery, lithium battery and other charges.
  • Drive high-power LED lights.

Reviews (0)

Write a review

Note: HTML is not translated!
    Bad           Good

NEW Products

Product Page : New Products

UVC Tubelight Kit for Covid19

UVC Tubelight Kit for Covid19

11 watt Germicidal UVC Tubelight Kit 11 watt UVC Tubelight Set for Germicidal ApplicationThis is a ..

Rs.949.90 (inc GST)
Rs.805.00 + GST

SKU: 2536 | DAC851
Stock: 47
Ultrasonic Dispenser Board 8-24 Volts

Ultrasonic Dispenser Board 8-24 Volts

Ultrasonic Sensor Based Dispenser Board (8 - 24 Volts)Ultrasonic Sensor based Dispenser Board for Au..

Rs.501.50 (inc GST)
Rs.425.00 + GST

SKU: 2535 | DAC861
Stock: 84
Delay Timer for Automatic Hand Sanitizer

Delay Timer for Automatic Hand Sanitizer

Delay Timer for Automatic Hand Sanitizer0 - 5 second Delay Timer for Automatic Hand Sanitizer Applic..

Rs.324.50 (inc GST)
Rs.275.00 + GST

SKU: 2533 | DAC855
Stock: 2
Ultrasonic Sensor with Mounting Bracket

Ultrasonic Sensor with Mounting Bracket

Ultrasonic Sensor with Mounting Bracket Easy Mounting Bracket for HCSR04 Ultrasonic Sensor Thi..

Rs.149.86 (inc GST)
Rs.127.00 + GST

SKU: 2538 | DAC856
Stock: 197

Have You Seen

Product Page : Have You Seen

Heat Shrink Sleeve 3mm Black

Heat Shrink Sleeve 3mm Black

Heat Shrink Sleeve 3 mm BlackHeat Shrink Sleeve Black Color 3 mm Industrial Grade WOER MakeHeat shri..

Rs.15.10 (inc GST)
Rs.12.80 + GST

SKU: 2373 | DAB937
Stock: 50
R385 6-12 Volt DC Diaphragm Pump

R385 6-12 Volt DC Diaphragm Pump

R385 Micro Diaphragm Water Pump R385 6 to 12 Volt self Priming Diaphragm non submersible water pump..

Rs.349.28 (inc GST)
Rs.296.00 + GST

SKU: 2532 | DAC791
Stock: 47
W1209 Mini Thermostat Temperature Controller

W1209 Mini Thermostat Temperature Controller

W1209 Mini Thermostat Temperature ControllerA NTC thermister is used for temperature sensing and has..

Rs.165.09 (inc GST)
Rs.139.91 + GST

SKU: 1004 | DAA723
Stock: 12
GY-906 MLX90614ESF MODULE

GY-906 MLX90614ESF MODULE

GY-906 MLX90614ESF MODULE GY-906-MLX90614ESF-New-MLX90614-Contactless-Temperature-Sensor-Module-Com..

Rs.1,121.00 (inc GST)
Rs.950.00 + GST

SKU: 2391 | DAC227
Stock: 10

Related Products

XL6009 Boost Module

XL6009 Boost Module

XL6009 Boost ModuleXL6009 Variable Boost Power Supply ModuleXL6009 is a high-performance switching c..

Rs.106.08 (inc GST)
Rs.89.90 + GST

SKU: 0519 | DAB376
Stock: 177
XL4016 280W CC-CV Buck Converter

XL4016 280W CC-CV Buck Converter

XL4016 280W CC-CV Buck ConverterXL4016 280W CC-CV DC-DC Buck / Step-Down ConverterThis is a high wat..

Rs.519.20 (inc GST)
Rs.440.00 + GST

SKU: 1602 | DAB372
Stock: 2