HM-10 BLE Original With TTL
The HM-10 Bluetooth module combines the powerful and programmable Texas Instruments CC2541 Chipset
with the required components to start right away with your BLE
development.The module offers an on-board voltage regulator and is
TTL-level and 5 V tolerant. The Bluetooth-SoC can be accessed via UART
interface and supports AT-Commands for setup. It supports full Bluetooth
4.0 standard and can be used for your Arduino or microcontroller to
Android or iOS communication projects.This module can be used to replace
HC-05, HC-06 and HC-07 devices.This module can also be configured and
used as an iBeacon for used with Apple devices.
Features of HM-10
BT Version: Bluetooth Specification V4.0 BLE
Send and receive no bytes limit.
Working frequency: 2.4GHz ISM band
Modulation method: GFSK(Gaussian Frequency Shift Keying)
RF Power: -23dbm, -6dbm, 0dbm, 6dbm, can modify through AT Command AT+POWE.
Speed: Asynchronous: 6K Bytes
Synchronous: 6K Bytes
Security: Authentication and encryption
Service: Central & Peripheral UUID FFE0,FFE1
Power: +3.3VDC 50mA
Long range: Open space have 100 Meters with iphone4s
Power: In sleep mode 400uA~1 .5mA, Active mode 8.5mA.
Working temperature:–5 ~ +65 Centigrade
Size: HM-10 26.9mm x 1 3mm x 2.2 mm;