- Stock: 35 InStock
- SKU: 0459 | DAA409
129.80 (inc GST)
Rs.110.00 + GST
GST Invoice on all Purchase. So you will be eligible to take input tax credit.
IF component not in Stock or require more quantity or want to buy in bulk e-mail us your requirements on: dnatechindia "at" gmail.com.
|Shipping : Due to Covid-19 situation delivery will be affected. Delivery period due to covid-19 issue will be from 4 - 12 days depending upon your location.|
The device achieves up to 20 MIPS throughput at 20 MHz at 1.8-5.5 V operation.
ATTINY13A-PU Microcontroller is Atmel's picoPower 8-bit AVR RISC-based microcontroller featuring 1KB of ISP Flash, 64-byte EEPROM, 64-byte SRAM, 32-Byte register file, and 4-channel 10-bit A/D converter.
By executing powerful instructions in a single clock cycle, the ATtiny13A achieves through puts approaching 1 MIPS per MHz allowing you to optimize power consumption versus processing speed.
Features of ATTiny13A-PU
High Performance, Low Power AVR® 8-Bit Microcontroller
– 120 Powerful Instructions – Most Single Clock Cycle Execution – 32 x 8 General Purpose Working Registers – Fully Static Operation – Up to 20 MIPS Througput at 20 MHz
- Advanced RISC Architecture
– 1K Bytes of In-System Self-programmable Flash program memory – 64 Bytes EEPROM – 64 Bytes Internal SRAM – Write/Erase Cycles : 10,000 Flash/100,000 EEPROM – Data retention : 20 Years at 85°C/100 Years at 25°C (see page 6) – Programming Lock for Self-Programming Flash & EEPROM Data Security
- High Endurance Non-volatile Memory segments
- One 8-bit Timer/Counter with Prescaler and Two PWM Channels
- 4-channel, 10-bit ADC with Internal Voltage Reference
- Programmable Watchdog Timer with Separate On-chip Oscillator
- On-chip Analog Comparator
Special Microcontroller Features
- debug WIRE On-chip Debug System
- In-System Programmable via SPI Port
- External and Internal Interrupt Sources
- Low Power Idle, ADC Noise Reduction, and Power-down Modes
- Enhanced Power-on Reset Circuit
- Programmable Brown-out Detection Circuit with Software Disable Function
- Internal Calibrated Oscillator
I/O and Packages
- 8-pin PDIP/SOIC : Six Programmable I/O Lines
- 10-pad MLF : Six Programmable I/O Lines
- 20-pad MLF : Six Programmable I/O Lines
- Operating Voltage : – 1.8 – 5.5V
– 0 – 4 MHz @ 1.8 – 5.5V – 0 – 10 MHz @ 2.7 – 5.5V – 0 – 20 MHz @ 4.5 – 5.5V
- Speed Grade :
- Industrial Temperature Range
- Low Power Consumption
- Active Mode : -190 µA at 1.8 V and 1 MHz
- Idle Mode : -24 µA at 1.8 V and 1 MHz
|Country of Origin||China|
|Imported By||ElectroSource Private Limited|