ISO3082 Isolated 5 Volts Half Duplex RS485 Transceiver IC

ISO3082 Isolated 5 Volts Half Duplex RS485 Transceiver IC

ISO3082 is an isolated half duplex differential line transceivers for TIA/EIA 485/422 applications. These devices are ideal for long transmission lines because the ground loop is broken to allow for a much larger common-mode voltage range. The symmetrical isolation barrier of the device is tested to provide 2500 VRMS of isolation for 60 s per UL 1577 between the bus-line transceiver and the logic-level interface.

Any cabled I/O can be subjected to electrical noise transients from various sources. These noise transients can cause damage to the transceiver and/or nearby sensitive circuitry if they are of sufficient magnitude and duration. These isolated devices can significantly increase protection and reduce the risk of damage to expensive control circuits.

Features of ISO3082 RS485 Transceiver IC

• Meets or Exceeds TIA/EIA RS-485 Requirements
• Signaling Rates up to 20 Mbps
• 1/8 Unit Load – Up to 256 Nodes on a Bus
• Thermal Shutdown Protection
• Low Bus Capacitance – 16 pF (Typical)
• 50 kV/?s Typical Transient Immunity
• Fail-safe Receiver for Bus Open, Short, Idle
• 3.3 Volts Inputs are 5 Volts Tolerant

Application of ISO3082 RS485 Transceiver IC

• Security Systems
• Chemical Production
• Factory Automation
• Motor and Motion Control
• HVAC and Building Automation Networks
• Networked Security Stations 

Package Datasheet

• ISO3082 isolated RS485 transreceiver IC

Package Includes

1 x ISO3082 Isolated RS485 Transceiver IC