• 8412906903
  • dnatechindia@gmail.com
  • PN532 RFID/NFC Controller Shield

Product Images are shown for illustrative purposes only and may differ from actual product.

PN532 RFID/NFC Controller Shield

  • Product Code: 1530
  • Availability: Out Of Stock
  • Price :

    Rs.1,711.00 (inc GST)

    Qty :

GST Invoice on all Purchase. So you will be eligible to take input tax credit.

IF component not in Stock or require more quantity or want to buy in bulk e-mail us your requirements on: dnatechindia "at" gmail.com.

Shipping : Same day dispatch for Most orders if payment done before 4 pm. Delivery Normally takes 2 to 7 working days depending upon your location.

PN532 RFID/NFC Controller Shield

PN532 breakout board shield is the perfect tool for any 13.56MHz RFID or NFC application. The Eduino NFC shield uses the PN532 chip-set (the most popular NFC chip on the market) and is what is embedded in pretty much every phone or device that does NFC. It can pretty much do it all, such as read and write to tags and cards, communicate with phones (say for payment processing), and 'act' like a NFC tag. If you want to do any sort of embedded NFC work, this is the chip you'll want to use!

NFC (Near Field Communications) is a way for two devices very close to each other to communicate. Sort of like a very short-range Bluetooth that doesn't require authentication. It is an extension of RFID, so anything you can do with RFID you can do with NFC. You can do more stuff with NFC as well; such as communicate bi-directionally with cell phones

Because it can read and write tags, you can always just use this for RFID-tag projects. We carry a few different tags that work great with this chip. It can also work with any other NFC/RFID Type 1 thru 4 tag (and of course all the other NXP MiFare type tags)

The Eduino shield was designed by RF engineers using the best test equipment to create a layout and antenna with 10cm (4 inch) range, the maximum range possible using the 13.56MHz technology. You can easily attach the shield behind a plastic plate with standoffs and still read cards through a (non-metal) barrier.

This shield is designed to use I2C or SPI communication protocols. I2C is the default, as it uses fewer pins: analog 4 and 5 are used for I2C (of course you can still connect other I2C devices to the bus). Digital #2 is used for "interrupt" notification. This means you don't have to sit there and 'poll' the chip to ask if a target tag has been found, the pin will pull low when a card, phone, etc is within range. You can adjust which pin is used if you need to keep digital #2 for something else. It is also easy to change the shield over to SPI where you can use any 4 digital pins by shorting two solder jumpers on the top of the PCB. Compatible with any "classic" Arduino - NG, Diecimilla, Duemilanove, UNO - as well as Mega R3 or later. For using the I2C interface with Mega R2 or earlier, two wires must be soldered as the I2C pins are in a different location on earlier Megas.

Reviews (0)

Write a review

Note: HTML is not translated!
    Bad           Good

NEW Products

Product Page : New Products

VL6180X Distance Sensor Module

VL6180X Distance Sensor Module

VL6180X Distance Sensor ModuleVL6180X Time of Flight Distance SensorThe VL6180X is a time-of-flight ..

Rs.623.04 (inc GST)

Nrf24l01 adaptor board 

Nrf24l01 adaptor board 

Nrf24l01 adaptor board Low cost Breakout board for NRF24L01 RF ModulesHaving problem interfacin..

Rs.82.60 (inc GST)

MPS20N0040D Pressure sensor

MPS20N0040D Pressure sensor

MPS20N0040D SensorMPS20N0040D MEMS Air Pressure Sensor.MPS20N0040D Air pressure sensor measures pres..

Rs.259.60 (inc GST)

T-Cobbler Plus for Raspberry Pi 2 & 3

T-Cobbler Plus for Raspberry Pi 2 & 3

T-Cobbler Plus for Raspberry Pi 2 and 3GPIO Extension Board for Raspberry Pi 3B and Raspberry Pi 3B ..

Rs.236.00 (inc GST)

Have You Seen

Product Page : Have You Seen

MAX 550 Micro Soldering Station

MAX 550 Micro Soldering Station

MAX 550 Micro Soldering StationThis is a prefect low cost solder station if you are looking to solde..

Rs.472.00 (inc GST)

Samsung 18650 2600mah Li-ion Battery

Samsung 18650 2600mah Li-ion Battery

Samsung ICR18650-26J 2.6Ah BatteryOriginal Samsung 18650 2600 mah Lithium-ion BatteryThis is or..

Rs.275.00 (inc GST)

SPDT 2 way Toggle Switch  (ON-ON)

SPDT 2 way Toggle Switch (ON-ON)

SPDT 3 Pin 2 Way Toggle SwitchMTS102 Single Pole Double throw (SPDT) ON-ON type Panel Mounting switc..

Rs.22.42 (inc GST)

Arduino Mega 2560 Pro Mini

Arduino Mega 2560 Pro Mini

Mega Pro 2560 Development Board Mega 2560 Pro a  Atmega2560 based compact Arduino MegaThis..

Rs.973.50 (inc GST)

Related Products

PN532 NFC RFID V3 Module

PN532 NFC RFID V3 Module

PN532 NFC RFID V3 ModuleNFC is a popular technology in recent years. Most company has introduces the..

Rs.885.00 (inc GST)