Product Images are shown for illustrative purposes only and may differ from actual product.

Nema17 4.2 kgcm Stepper motor

Write a review | 1 reviews

Stock: 3
Availability: InStock priceValidUntil: 2026-05-15
SKU: 1903 | DAC455

Rs. 837.80 (inc GST)
Rs.710.00 + GST

Qty :
Qty Qty

GST Invoice: Available for all purchases; eligible for input tax credit.

Delivery: 2–8 days across India. No MOQ required.

Bulk Orders: Need a larger quantity or item not in stock? Email: dnatechindia [at] gmail.com

Import Service: We import a wide range of electronic components on request.

Description

Nema17 4.2 kgcm Stepper motor

The Nema17 4.2 kg-cm Stepper motor can provide 4.2 kg-cm of torque at 1.7 Ampere current per phase.

The stepper motors move in precisely repeatable steps, hence they are the motors of choice for the machines requiring precise position control.

The motor’s position can be commanded to move or hold at one position with the help of Stepper Motor Drivers. The Nema-17 4.2 kg-cm Stepper motor provides excellent response to starting, stopping and reversing pulses from stepper motor driver.

They are very useful in the various application especially which demands low speed with high precision. Many machines such as 3D Printers, CNC Router and Mills, Camera Platforms, XYZ Plotters etc.

It is a brushless DC motor, so the life of this motor is dependent upon life of the bearings. The position control is achieved by a simple Open Loop control mechanism so doesn’t require complex electronic control circuitry.

The motor’s shaft has been machined for good grip with a pulley, drive gear etc. and especially avoiding stall or slip.

We have Various sizes of Stepper Motors.Check out our complete collection of Stepper Motors

If you are in Nashik you can buy this Electronic Component at our local shop at New CBS, Nashik or you can place order online and get it delivered at your doorstep anywhere in India.

Features of Nema17 4.2 kgcm Stepper motor

Input pulse decides the rotation angle of the motor.
High accuracy of around 3 to 5% a step.
Provides good starting, stopping and reversing.
Control of this motor is less costly because of exclusion of complex control circuitry.
The speed is proportional to the frequency of the input pulses.

Specifications of Nema17 4.2 kg cm Stepper motor

Step Angle : 1.8°
Current/Phase : 1.7 Amp
Resistance/Phase : 1.65 Ohm
Inductance/Phase : 3.2 mH
Holding Torque : 4.0 kg.cm
No. of Leads : 4
Detent Torque : 150 g.cm
Rotor Inertia : 54 g.cm
Mass : 0.28 Kg
Temperature Rise : 80°Cmax
Ambient Temperature : -20°C~+50°C
Insulation Resistance : 100 MO Min.,500VDC
Dielectric Strength : 500VAC for 1minute
Shaft Radial Play : 0.02Max. (450g-load)
Shaft Axial Play : 0.08Max. (450g-load)
Max. radial force : 28N (20mm from the flange)
Max. axial force : 10N
Motor Length : 40(mm)

Extra Information
Country of Origin	China
Imported By	ElectroSource Private Limited

Reviews (1)

Write a review

Your Name

Your Review

Note: HTML is not translated!

Rating Bad Good

Verification Code

Frequently Asked Questions

Do you provide a GST bills?

Yes we provide GST Bill by the name of DNA Solutions. You will receive a GST compliant invoice for your records. You can take GST benefit.

What is your return / replacement policy?

Returns/replacements depend on the item type and condition. If there’s an issue, contact us with photos/videos and we’ll guide you as per policy.

How long does delivery take?

Delivery time depends on your PIN code and the courier network. Tracking is shared after dispatch.

What payment methods do you accept?

We accept UPI, cards, netbanking, and other checkout options shown on the payment page.

What if I need a component that is not listed on your website?

Will you send the same brand/manufacturer every time?

For some passive components, brand may vary based on availability. If you need a specific brand or matching lot, mention it before ordering and we’ll advise availability.

View all FAQs →

NEW Products

Product Page : New Products

Mornsun LS03 13B24R3 AC DC converter 3W power supply module

Mornsun LS03 13B24R3 AC DC Converter Module Mornsun LS03 13B24R3 AC DC converter for 24V output, 3W..

Rs.191.16 (inc GST)
Rs.162.00 + GST

SKU: 7725 | DAH587

Stock: 1

9 Pin Male Right Angle Screwable Plug 7.62mm (Combicon Connector)

Combicon Connector 9 Pin Male Right Angle Screwable Plug 7.62mm 9 Pin Male Right Angle Screwable Pl..

Rs.22.30 (inc GST)
Rs.18.90 + GST

SKU: 3644 | DAF251

Stock: 1

MAX3232CSE+ RS-232 Interface IC

MAX3232CSE+ RS-232 Transceiver IC MAX3232CSE+ RS-232 Transceiver IC with 3.0V to 5.5V supply, 120 kb..

Rs.84.96 (inc GST)
Rs.72.00 + GST

SKU: 3883 | DAG607

Stock: 10

Write review

IRFP350PBF N-channel Power MOSFET

Vishay IRFP350 N-channel Power MOSFET IRFP350PBF, N-channel MOSFET, low on-resistance, fast switchi..

Rs.171.69 (inc GST)
Rs.145.50 + GST

SKU: 1120 | DAA180

Stock: 13

Have You Seen

Product Page : Have You Seen

18650 Battery Holder for 4 Battery

18650 Battery Holder for 4 Battery18650 Battery Holder for 4 BatteryFeatures of 18650 HolderThis ite..

Rs.67.26 (inc GST)
Rs.57.00 + GST

SKU: 1110 | DAB284

Stock: 47

Hongfa HFD27/012-S 12 Volt Relay

Combicon 2 Pin Right Angle Male Header Connector XY-2500 F-B 5.08 series 2 Pin Right Angle Male hea..

Rs.46.96 (inc GST)
Rs.39.80 + GST

SKU: 2740 | DAE275

Stock: 4

CJMCU MCP4725 I2C DAC Breakout Development Board

CJMCU MCP4725 I2C DAC Breakout Development Board CJMCU MCP4725 I2C DAC Board for 12-bit resolution a..

Rs.163.49 (inc GST)
Rs.138.56 + GST

SKU: 8947 | DAF703

Stock: 10

Write review

DFRobot FireBeetle 2 ESP32-E IoT Microcontroller with Header (Supports Wi-Fi & Bluetooth)

DFRobot FireBeetle 2 ESP32-E IoT Microcontroller with Header (Supports Wi-Fi & Bluetooth)DFR0654..

Rs.1,245.73 (inc GST)
Rs.1,055.70 + GST

Nema17 4.2 kgcm Stepper motor

Qty :

Nema17 4.2 kgcm Stepper motor

The stepper motors move in precisely repeatable steps, hence they are the motors of choice for the machines requiring precise position control.

The motor’s position can be commanded to move or hold at one position with the help of Stepper Motor Drivers. The Nema-17 4.2 kg-cm Stepper motor provides excellent response to starting, stopping and reversing pulses from stepper motor driver.

They are very useful in the various application especially which demands low speed with high precision. Many machines such as 3D Printers, CNC Router and Mills, Camera Platforms, XYZ Plotters etc.

It is a brushless DC motor, so the life of this motor is dependent upon life of the bearings. The position control is achieved by a simple Open Loop control mechanism so doesn’t require complex electronic control circuitry.

The motor’s shaft has been machined for good grip with a pulley, drive gear etc. and especially avoiding stall or slip.

We have Various sizes of Stepper Motors.Check out our complete collection of Stepper Motors

If you are in Nashik you can buy this Electronic Component at our local shop at New CBS, Nashik or you can place order online and get it delivered at your doorstep anywhere in India.

Features of Nema17 4.2 kgcm Stepper motor

Input pulse decides the rotation angle of the motor.High accuracy of around 3 to 5% a step.Provides good starting, stopping and reversing.Control of this motor is less costly because of exclusion of complex control circuitry.The speed is proportional to the frequency of the input pulses.

Specifications of Nema17 4.2 kg cm Stepper motor

Related Links

Related Video

Write a review

NEW Products

Product Page : New Products

SKU: 7725 | DAH587

Stock: 1

SKU: 3644 | DAF251

Stock: 1

SKU: 3883 | DAG607

Stock: 10

SKU: 1120 | DAA180

Stock: 13

Have You Seen

Product Page : Have You Seen

SKU: 1110 | DAB284

Stock: 47

SKU: 2740 | DAE275

Stock: 4

SKU: 8947 | DAF703

Stock: 10

SKU: 10352 | DAJ184

Stock: 5

Related Products

SKU: 7286 | DAG525

Stock: 0

SKU: 10641 | DAJ271

Stock: 0

SKU: 10654 | DAJ513

Stock: 0

Input pulse decides the rotation angle of the motor.
High accuracy of around 3 to 5% a step.
Provides good starting, stopping and reversing.
Control of this motor is less costly because of exclusion of complex control circuitry.
The speed is proportional to the frequency of the input pulses.