Product Images are shown for illustrative purposes only and may differ from actual product.
LM3915 Dot/Bar Display Driver
GST Invoice on all Purchase. So you will be eligible to take input tax credit.
IF component not in Stock or require more quantity or want to buy in bulk e-mail us your requirements on: dnatechindia "at" gmail.com.
|Shipping : Due to Covid-19 situation delivery will be affected. Delivery period due to covid-19 issue will be from 4 - 12 days depending upon your location.|
LM3915 Dot/Bar Display Driver
The LM3915 is a monolithic integrated circuit that senses analog voltage levels and drives ten LEDs, LCDs or vacuum fluorescent displays, providing a ogarithmic 3 dB/step analog display.
One pin changes the display from a bar graph to a moving dot programmable, eliminating the need for current limiting resistors. The whole display system can operate from a single supply as low as 3V or as high as 25V. The IC contains an adjustable voltage reference and an accurate ten-step voltage divider. The high-impedance input buffer accepts signals down to ground and up to within 1.5V of the positive supply. Further, it needs no protection against inputs of ±35V. The input buffer drives 10 individual comparators referenced to the precision divider. Accuracy is typically better than 1 dB.
The LM3915 is extremely easy to apply. A 1.2V fullscale meter requires only one resistor in addition to the ten LEDs. One more resistor programs the fullscale anywhere from 1.2V to 12V independent of supply voltage. LED brightness is easily controlled with a single pot. The LM3915 is very versatile. The outputs can drive LCDs, vacuum fluorescents and incandescent bulbs as well as LEDs of any color. Multiple devices can be cascaded for a dot or bar mode display with a range of 60 or 90 dB. LM3915s can also be cascaded with LM3914s for a linear/log display or with LM3916s for an extended-range VU meter.
Features of LM3915
3 dB/step, 30 dB Range
Drives LEDs, LCDs, or Vacuum Fluorescents
Bar or Dot Display Mode Externally Selectable by user
Expandable to Displays of 90 dB
Internal Voltage Reference from 1.2V to 12V
Operates with Single Supply of 3V to 25V
Inputs Operate Down to Ground
Output Current Programmable from 1 mA to 30mA
Input Withstands ±35V without Damage or false output
Outputs are Current Regulated, Open collector
Directly Drives TTL or CMOS
Product Page : New Products
Raspberry Pi 400 Personal Computer (Unit Only)
Raspberry Pi 400 Personal Computer -US layout (Unit ..
Rs.6,466.40 (inc GST)
Rs.5,480.00 + GST
SKU: 2660 | DAE108
DM542 Microstep Stepper Motor DriverDM542 18-50 Volts, 4.2 Ampere Digital Microstep Stepper Motor Dr..
Rs.1,449.63 (inc GST)
Rs.1,228.50 + GST
SKU: 2654 | DAE101
Condesor MicElectret Condenser MicrophoneAn Electret Condenser microphone (a.k.a Condenser Microphon..
Rs.8.26 (inc GST)
Rs.7.00 + GST
SKU: 2640 | DAE076
74HC123 Dual retriggerable monostable multivibrator74HC123 Dual retriggerable monostable multivibrat..
Rs.20.06 (inc GST)
Rs.17.00 + GST
SKU: 2525 | DAC715
Have You Seen
Product Page : Have You Seen
7483 4-Bit Binary full adderThe 7483/74LS83 is a high-speed 4-Bit binary Full Adder with internal
Rs.115.05 (inc GST)
Rs.97.50 + GST
SKU: 0229 | DAA235
P6KE15CA Bi-Directional TVS Diode
P6KE15CA 600 watts Bi-Directional Transient Voltage Suppression..
Rs.5.90 (inc GST)
Rs.5.00 + GST
SKU: 0991 | DAA357
STP140NF75 Power MOSFETThis Power MOSFET is the latest development of STMicroelectronis unique "Sing..
Rs.116.82 (inc GST)
Rs.99.00 + GST
SKU: 1145 | DAA403