12-bit HEX to BCD Convertor

This subroutine converts 12 bit hexadecimal number into its equivalent BCD number. Since the number to be converted is 12 bit total two bytes will be required to represent it. And the converted number will be maximum 4 byte but since the output is in BCD two memory locations will be used to store the final result. The number to be converted is stored in R6 (MSB) & R7 (LSB) whereas the converted BCD number is stored in R0 (MSB) & R1 (LSB).

First we work on the HEX LSB (R7) & convert it into BCD as stated in 8-bit HEX to BCD convertor. Then we check if the HEX MSB (R6) is 0 if not zero we add 256 to the BCD & decrement the HEX MSB (R6) until it becomes zero.

Hex to BCD:

mov r0,#00h mov r1,#00h clr c mov a,r7
mov b,#100	//Divide LSB by 100
div ab
mov r0,a	//save the 100^th place
mov a,b
mov b,#10	//Divide LSB by 10
*clr c* *div ab* *swap a* *orl a,b*
*mov r1,a*	//save the units & tenth place
*mov a,r6*
*cjne a,#00h,c1_hextobcd*	//Check if the MSB is 0 if not then continue
*ret*

//Add 256 to the BCD number & decrement the HEX MSB by 1 until it becomes 0

c1_hextobcd: clr c mov a,r1 add a,#56h da a mov r1,a jnc c2_hextobcd clr c mov a,r0 add a,#01h da a mov r0,a

c2_hextobcd: clr c mov a,r0 add a,#02h da a mov r0,a djnz r6,c1_hextobcd ret

Written by Administrator

Administrator

Website: http://www.dnatechindia.com/admin/index.php

Product categories

Have You Seen

PMS5003 PM2.5 AIR QUALITY SENSOR

SKU: 7196 | DAG365

Stock: 44

DFRobot UNIHIKER M10 - IoT Python Single Board Computer with Touchscreen

SKU: 10348 | DAJ180

Stock: 5

12-bit HEX to BCD Convertor

Administrator

Product categories

Have You Seen

PMS5003 PM2.5 AIR QUALITY SENSOR

SKU: 7196 | DAG365

Stock: 44

DFRobot UNIHIKER M10 - IoT Python Single Board Computer with Touchscreen

SKU: 10348 | DAJ180

Stock: 5

12-bit HEX to BCD Convertor

Administrator

Share This